Type HE off-white coloured cement produces light-coloured concrete, mortars, renders & grouts when used with light-coloured sands – sold in 20kg bags.

DryPak Concrete is a high-quality 25 MPa, well-proportioned mix of blended cement, 10 mm crushed stone and sand. It is suitable for all general concrete applications such as garden paths, concrete pavers, patios, light foundations and post holes. It requires only the addition of clean water followed by mixing prior to use.

DryPak Dried Sand can be used in numerous applications including gap filling between paving, BBQ trays, sandpits, chimneys, for instance.

Heat-resistant cement for blending with various sands or aggregates to produce mortars and concretes in application with heat requirements of 0-1200֯C. Can be used with clean concreter’s sand as a mortar for fireplaces and barbeques.

High Early (HE) Cement is ideally suited for use where early strength development is required. High Early Cement does not provide high ultimate strength but more rapid strength gain at early age, specifically from 1 to 3 days.

Instant Bitumen Coldmix is a 7mm graded bituminous premix asphalt and is ready for immediate use in repairs, driveways, trenches, pot-holes, carparks and footpaths.

DryPak Brickies Grey® Mortar is a carefully proportioned blend of selected sands, cement and hydrated lime (1:1:6 by volume). Suitable for laying masonry blocks, bricks and stonework above the damp proof membrane, it only requires the addition of clean water followed by mixing prior to use.

DryPak Speed Set is a carefully selected blend of cement, fly ash, sands and stone designed to set very rapidly without any mixing. It is suitable for bedding fence posts, letterboxes, clotheslines & numerous other non-structural applications. No mixing is required. Simply add to water to achieve a rapid set in just 20 minutes.

Type GB blended grey used in structural concrete, mortar, renders, grouts & cement-based products – sold in 20kg bags.

Type GP grey cement used in structural concrete, mortar, renders, grouts & cement-based products – sold in 20kg bags.

Hydrated lime is mainly used in conjunction with cement for mortar – sold in 20kg bags.

A sulphate-resistant cement typically used in concrete and mortars where the possibility of attack of sulphate bearing waters and soils is high – sold in 20kg bags.

Medium-grade, general-purpose render for application to stable, masonry-based surfaces with sufficient porosity. Use over clay/concrete bricks, aerated concrete blocks/panels (with Macbond additive, existing cement renders).

Fine-grade, general-purpose render for application to stable masonry-based surfaces with sufficient porosity. Ideal for sponge finishing. Use over clay/concrete bricks, aerated concrete blocks/panels (with Macbond additive, existing cement renders).

Coarse-grade, lightweight render for thick section application to stable, masonry-based surfaces with sufficient porosity. Use over clay/concrete bricks/blocks, aerated concrete blocks/panels, existing cement renders.

Medium-grade render with synthetic fibre reinforcement. Use over clay/concrete bricks and blocks, aerated concrete blocks/panels (AAC), existing cement renders.

Macbond can be added to cement-based mixes including renders, screeds and tile adhesives to improve tensile adhesion, flexibility and numerous other properties. Available in 1, 2, 4, 10 & 20 litres.

Medium-grade pre-mixed polymer render for application to difficult surfaces. Use over previously painted masonry surfaces, fibre-cement base sheet. Available in 4 & 15 litres.

Fine-grade joint stopping compound for application to fibre-cement sheet constructions. Available in 4 & 15 litres.

Acrylic base primer for application to masonry-based surfaces prior to texture or paint.